EV Charging Carbon Accounting for UK Businesses


EV charging emissions are reported mainly as Scope 2: the grid electricity your business buys and delivers to vehicles through chargers it owns or controls. Transmission and distribution losses go in Scope 3, and the vehicles themselves add no Scope 1 tailpipe emissions. A clean report needs three things: the right scope for each charging situation, the UK conversion factor for your reporting year, and metered data from every charger. We install and manage commercial charge points, so the metering and management questions below are ones we deal with on real sites.
TL;DR
Electricity bought to charge vehicles at sites you own or control is Scope 2. Grid losses on that electricity are Scope 3. Battery electric vehicles have no Scope 1 tailpipe emissions.
The UK grid factor for 2025 was 0.17700 kg CO₂e/kWh, plus 0.01853 kg CO₂e/kWh for transmission and distribution losses. Use the DESNZ set that matches your reporting year.
If you sell electricity to drivers or tenants, the GHG Protocol treats you like an energy retailer, and those emissions sit in Scope 3 category 3.
Avoid double counting: on-site charging may already be inside your site electricity figures.
Accurate reporting rests on metered, charger-level kWh data, so plan metering and software before the chargers go in.
Table of Contents
What carbon accounting means for a site with EV chargers
Carbon accounting measures the greenhouse gases your organisation produces over a set period and turns them into a baseline you can track. ICAEW describes measurement as producing that footprint, and adds that measuring alone does not replace actually reducing emissions or backing up sustainability claims. So the report should show your baseline and the reductions you can evidence.
For EV charging, the useful question is simple: who buys the electricity, who owns or controls the charger, and who drives the vehicle? The answers decide the scope.
The same logic applies whether you run a workplace car park, a logistics depot, a hotel, a school or a business park with tenants. Only the allocation changes.
Scope 1, 2 and 3 for EV charging in plain terms
The GHG Protocol Scope 2 Guidance defines the three scopes. Scope 1 covers emissions from sources your company owns or controls. Scope 2 covers emissions from generating purchased electricity, steam, heat or cooling that you consume. Scope 3 covers upstream and downstream value chain emissions, including upstream fuel production and grid transmission and distribution under category 3.
UK Government guidance uses the same definitions. DESNZ’s 2025 methodology paper reports purchased electricity as Scope 2, with transmission and distribution losses and well-to-tank fuel factors reported as Scope 3.
In practice, for EV charging:
Situation | Typical scope | What to count |
Your fleet charges on your own meter at a depot or site | Scope 2 | kWh bought for charging, times the grid factor |
Losses on the grid delivering that electricity | Scope 3 | kWh times the transmission and distribution factor |
Fleet vehicles still running on diesel or petrol | Scope 1 | Fuel burned |
You sell or recharge electricity to drivers, tenants or customers | Scope 3, category 3 | Treated like an energy retailer |
Grey-fleet or salary-sacrifice vehicles | Scope 3 | Usually calculated per kWh or per km |
The Energy Saving Trust classifies purchased electricity for plug-in EVs as Scope 2, fossil-fuel combustion as Scope 1, and grey-fleet and salary-sacrifice vehicles as Scope 3. It also notes that battery electric vehicles have no direct tailpipe emissions, but the electricity used to charge them still creates emissions elsewhere.
Setting the reporting boundary
Before you classify anything, decide your organisational boundary: which entities and sites are inside your inventory. PwC’s sustainability reporting guide explains that the organisational and operational boundaries together make up the reporting boundary. Operational means identifying every source and sorting it into a scope. Apply the same boundary every year, or your year-on-year comparison will not mean much.
For property owners and managing agents, this is where it gets practical. Chargers in a landlord-controlled car park, paid for by the landlord and recharged to tenants, look very different from chargers on a tenant’s own meter. Write down who controls each charge point and who pays the electricity bill, and keep that record with your report.
Which emissions factor to use
The UK Government publishes greenhouse gas conversion factors every year. The 2026 DESNZ methodology report says factors should be matched to activity that falls wholly or mostly in 2026, and that the set is updated annually, with the next publication scheduled for June 2027.
The grid factor moves because the fuel mix moves. DESNZ explains that it depends on the relative prices of coal and gas, peak demand, renewables output and net imports. The last UK coal power station closed in September 2024, which supports the long decline in coal-fired generation.
For reference, the Energy Saving Trust’s toolkit gives the 2025 figures: a Scope 2 factor of 0.17700 kg CO₂e/kWh and a Scope 3 transmission and distribution factor of 0.01853 kg CO₂e/kWh. Those apply to 2025 activity. For 2026 activity, take the figures from the 2026 DESNZ conversion factor tables. Do not reuse an older number because it is the one you remember.
The DESNZ factors are average UK grid factors per kWh. They exclude upstream fuel production and delivery, which is why well-to-tank and transmission and distribution losses are listed separately in Scope 3.
A worked example: a depot charging 40,000 kWh a year
Take a distribution depot whose chargers draw 40,000 kWh from the grid in a year. This is an illustration using the 2025 factors above. For a real report, apply the factors for your own reporting year.
Scope 2: 40,000 kWh × 0.17700 = 7,080 kg CO₂e, or 7.08 tonnes.
Scope 3 (transmission and distribution losses): 40,000 kWh × 0.01853 = 741.2 kg CO₂e, or 0.74 tonnes.
Total for the electricity: 7,821.2 kg CO₂e, or about 7.82 tonnes.
Scope 1: zero from the vehicles themselves, because battery electric vehicles do not burn fuel.
The number that matters for your board is the comparison. Take the diesel the same vehicles used to burn, convert it with the DESNZ fuel factors, and set it against the charging figure. You then have a reduction you can evidence from your own data, which is what ICAEW’s point about substantiating claims requires.
Getting the data: metered kWh per charger
The calculation is easy. Getting trustworthy kWh is where reports go wrong.
The Energy Saving Trust advises that on-site charging may already be captured in the site’s Scope 2 and Scope 3 electricity reporting, so take care to avoid double counting. It also says off-site charging should be reported separately from fuel-related emissions. If your whole-site meter already includes the chargers, adding charger kWh on top counts the same electricity twice.
A practical data set for each charger includes:
Energy delivered per session, in kWh
Date and time of each session
Which charger and which site
Which vehicle or user group (fleet, staff, visitor, tenant)
Whether the user was charged for the electricity
That last pair matters for allocation. Fleet vehicles you own, employee cars and public or tenant users fall into different scopes, so they need separating at source, not in a spreadsheet at year end.
The approach we take with clients is to build the data trail in at design stage. We design, supply, install and manage commercial charge points, with charging software and back-office management, payment and RFID solutions and load management. Linking users and sessions to individual chargers is what gives you session-level records you can split by user type later. Sites that add this after the fact usually have to reconstruct it from bills.
If you are still planning, our guide to EV charging power requirements for UK businesses covers the electrical side that determines what you will be metering.
Selling electricity to drivers, tenants or customers
Hotels, business parks, landlords and public hosts often charge people for the electricity. The GHG Protocol’s technical assistance team answered this directly in May 2025: if you sell electricity to another company through EV charging, you act like an energy retailer and account for those emissions in Scope 3, category 3, which covers fuel- and energy-related activities not already in Scope 1 or 2.
In short, for a host:
Electricity you pass on to third parties is reported in Scope 3 category 3.
Electricity used by your own vehicles on the same chargers stays in your Scope 2.
The split depends on charger-level and user-level data, which is another reason to meter and tag sessions from day one.
If you host chargers for the public, or are considering it, the commercial model matters as much as the carbon accounting. See how our public charging and hosting options work, including revenue models for hosts.
Renewable electricity and market-based reporting
Many businesses buy renewable tariffs and want the chargers to show as zero carbon. The method decides whether that is allowed.
Under the location-based method you use the grid average factor, and it cannot reach zero whatever your contracts say. Under the market-based method you use contractual instruments such as REGO-backed supply, following the GHG Protocol hierarchy: supplier-specific factor first, then residual mix, then grid average. Thallo’s explainer sets out how retiring certificates for 100% of consumption brings market-based Scope 2 to zero while the location-based figure stays unchanged.
The sensible approach is to report both and to label them clearly. Do not present a market-based zero as the physical reality of your grid use.
If you generate power on site, the factor should follow the source. The Energy Saving Trust notes that a vehicle’s factor is tied to the electricity used to charge it, so on-site sources with their own emissions characteristics need a source-specific factor rather than the grid average. Pairing chargers with solar PV and battery storage is one reason we also help commercial customers assess energy solutions for businesses, and it is something to plan for in the accounting too, so on-site generation and grid imports are metered separately.

UK reporting obligations
Which rules apply depends on your size and whether you are listed.
Large unquoted companies and LLPs. ICAEW’s summary of the carbon and energy reporting rules says in-scope organisations report annual UK emissions from fuel and purchased electricity, energy consumed in kWh, calculation methods, an intensity ratio and principal energy-efficiency measures, with prior-year data required except in the first year. EV charging electricity falls within purchased electricity.
Public charge point operators. GOV.UK states that the Public Charge Point Regulations 2023 came into force on 24 November 2023. Applicable operators must meet requirements including regular reporting to OPSS and OZEV, with other requirements depending on charge point type. This is data reporting on the charge points, separate from your emissions inventory, but it relies on the same session and uptime data.
Sustainability standards. The UK Sustainability Reporting Standards were published in final form on 25 February 2026 and are available for voluntary use. The FCA was consulting on listed-company requirements from 1 January 2027. If you are listed or supply chain to a listed customer, check the current position with your accountant or auditor, because customers increasingly ask suppliers for the same Scope 1, 2 and 3 breakdown.

What a practical EV charging carbon report contains
Whatever your size, a report that stands up to questions has the same parts:
Boundary statement. Which sites, entities and chargers are included, and who controls each one.
Activity data. kWh per site and charger for the period, split by user group.
Factors and year. The exact DESNZ factors used, with the publication year, for Scope 2 and Scope 3 separately.
Results by scope. Scope 2 electricity, Scope 3 transmission and distribution losses, Scope 3 category 3 for electricity sold on, and Scope 1 fuel for any remaining combustion vehicles.
Method notes. Location-based and market-based figures if you use both, and how you avoided double counting.
Intensity ratio. For example kg CO₂e per vehicle, per mile or per site, so year-on-year progress is visible as charging grows.
Reduction actions. Load management, smarter scheduling, on-site generation and efficiency measures, each tied to a measured result.
Prior-year comparison. Same boundary, same method, with any change explained.
The point is traceability. Anyone checking your figure should be able to follow it back from the report to the charger and the session.
Our view: plan the data before you plan the chargers
Most businesses we speak to think of carbon reporting as something for the sustainability team to sort out after the chargers are live. We think that is backwards. The accounting depends on three things set at design stage: how the chargers are metered, how users and vehicles are separated, and how sessions are recorded. If those are right, the report is a calculation. If they are not, it is a reconstruction. That is why we design, install and manage charging as one job. Site assessment, charger choice, charging software, payment and RFID, load management and ongoing maintenance all affect the quality of the kWh data you end up reporting. Where a site also wants solar PV or battery storage, we assess that alongside the chargers, so on-site generation and grid supply can be accounted for separately from the start. For businesses that want to reduce installation costs, we also help identify and apply for available government EV charging grants where eligible, and we offer funded and charging-as-a-service models for those who prefer not to carry the capital cost. Swift Charging
Plan your charging with reporting in mind
If you are installing, expanding or replacing chargers, we can look at your site, your power supply and how you want to report. We work from feasibility and site assessment through design, installation, commissioning and long-term management, for workplaces, fleets, hotels, schools, business parks and public sites across the UK.

Start with a commercial EV feasibility review, or look at our workplace charging and fleet charging solutions. If cost is the first question, our EV charger installation cost guide and grant eligibility page are the next stops.
FAQ
Are EV charging emissions Scope 1, 2 or 3?
Electricity you buy to charge vehicles at sites you own or control is Scope 2. Transmission and distribution losses on that electricity are Scope 3. Battery electric vehicles produce no direct Scope 1 emissions, though any diesel or petrol vehicles you still run remain in Scope 1.
Which emissions factor should I use for EV charging in the UK?
Use the UK Government’s greenhouse gas conversion factors for your reporting year, published annually by DESNZ. For 2025 activity the grid factor was 0.17700 kg CO₂e/kWh, plus 0.01853 kg CO₂e/kWh for transmission and distribution. For 2026 activity, use the 2026 set.
How do I avoid double counting charging electricity?
Check whether your site meter already includes the chargers. If it does, charging electricity is already in your Scope 2 figure and should not be added again. Charger-level metering lets you separate fleet, staff and third-party use cleanly.
Do I report electricity I sell to drivers or tenants?
Yes, but differently. The GHG Protocol’s technical guidance says a company selling electricity through EV charging acts like an energy retailer and reports those emissions in Scope 3, category 3. Electricity used by your own vehicles stays in Scope 2.
Does a renewable tariff make my charging zero carbon?
Only under the market-based method, and only where the supply is backed by valid certificates. Your location-based figure stays at the grid average. Report both and label them, so the difference is clear.
Sources
Recommended